7
Command Line Interface
Command Mode
Global Configuration
Command Usage
The access point currently only supports EAP-MD5 CHAP for 802.1X
supplicant authentication.
Example
SMC AP(config)#802.1x-supplicant user WA6102 dot1xpass
SMC AP(config)#
show authentication
This command shows all 802.1X authentication settings, as well as the address filter
table.
Command Mode
Exec
Example
SMC AP#show authentication
Authentication Information
===========================================================
MAC Authentication Server
MAC Auth Session Timeout Value : 0 min
802.1x supplicant
802.1x supplicant user
802.1x supplicant password
Address Filtering
System Default : ALLOW addresses not found in filter table.
Filter Table
MAC Address
-----------------
00-70-50-cc-99-1a
00-70-50-cc-99-1b
=========================================================
SMC AP(config)#
7-70
: DISABLED
: DISABLED
: EMPTY
: EMPTY
: ALLOWED
Status
----------
DENIED
ALLOWED