Delete - SMC Networks EliteConnect SMC2891W-AG User Manual

7
Command Line Interface
The following example shows how to download a configuration file:
SMC AP#copy tftp file
1. Application image
2. Config file
3. Boot block image
Select the type of download<1,2,3>:
TFTP Source file name:syscfg
TFTP Server IP:192.168.2.29
SMC AP#

delete

This command deletes a file or image.
Syntax
delete <filename>
filename - Name of the configuration file or image name.
Default Setting
None
Command Mode
Exec
Caution: Beware of deleting application images from flash memory. At least one
application image is required in order to boot the access point. If there are
multiple image files in flash memory, and the one used to boot the access point
is deleted, be sure you first use the bootfile command to update the application
image file booted at startup before you reboot the access point.
Example
This example shows how to delete the test.cfg configuration file from flash memory.
SMC AP#delete test.cfg
Are you sure you wish to delete this file? <y/n>:
SMC AP#
Related Commands
bootfile (7-56)
dir (7-59)
7-58
[1]:2