Interface Wireless; Vap - SMC Networks EliteConnect SMC2891W-AG User Manual

interface wireless

This command enters wireless interface configuration mode.
Syntax
interface wireless <a | g>
• a - 802.11a radio interface.
• g - 802.11g radio interface.
Default Setting
None
Command Mode
Global Configuration
Example
To specify the 802.11a interface, enter the following command:
SMC AP(config)#interface wireless a
SMC AP(if-wireless a)#

vap

This command provides access to the VAP (Virtual Access Point) interface
configuration mode.
Syntax
vap <vap-id>
vap-id - The number that identifies the VAP interface. (Options: 0-3)
Default Setting
None
Command Mode
Interface Configuration (Wireless)
Example
SMC AP(if-wireless g)#vap 0
SMC AP(if-wireless g: VAP[0])#
Wireless Interface Commands
7
7-97