Show Snmp Target; Show Snmp Filter; Command Mode - SMC Networks EliteConnect SMC2891W-AG User Manual

Example
SMC AP#show snmp group-assignments
GroupName :RWPriv
UserName :chris
SMC AP#
SMC AP#

show snmp target

This command displays the SNMP v3 notification target settings.
Syntax
show snmp target

Command Mode

Exec
Example
SMC AP#show snmp target
Host ID : mytraps
User : chris
IP Address : 192.168.1.33
UDP Port : 162
=============================
SMC AP#

show snmp filter

This command displays the SNMP v3 notification filter settings.
Syntax
show snmp filter [filter-id]
• filter-id - A user-defined name that identifies an SNMP v3 notification filter.
(Maximum length: 32 characters)
Command Mode
Exec
Example
SMC AP#show snmp filter
Filter: trapfilter
Type: include
Subtree: iso.3.6.1.2.1.2.2.1
Type: exclude
Subtree: iso.3.6.1.2.1.2.2.1.1.23
=============================
SMC AP#
7
SNMP Commands
7-53