SMC Networks EliteConnect SMC2891W-AG User Manual page 84

6
System Configuration
Upon uploading a new configuration file you will be prompted to either restore
factory settings, or reboot the unit.
CLI Commands for Downloading Software from a TFTP Server – Use the copy tftp
file command from the Exec mode and then specify the file type, name, and IP
address of the TFTP server. When the download is complete, the dir command can
be used to check that the new file is present in the access point file system. To run
the new software, use the reset board command to reboot the access point.
SMC AP#copy tftp file
1. Application image
2. Config file
3. Boot block image
Select the type of download<1,2,3>:
TFTP Source file name:img.bin
TFTP Server IP:192.168.2.29
SMC AP#dir
File Name
--------------------------
dflt-img.bin
img.bin
syscfg
syscfg_bak
262144 byte(s) available
SMC AP#reset board
Reboot system now? <y/n>: y
6-32
[1]:1
Type File Size
---- -----------
2 1319939
2 1629577
5 17776
5 17776
7-57
7-59
7-10