SMC Networks EliteConnect SMC2891W-AG User Manual page 109

using the rogue-ap scan command. To view the database of detected access
points, use the show rogue-ap command from the Exec level.
SMC AP(config)#interface wireless g
Enter Wireless configuration commands, one per line.
SMC AP(if-wireless g)#rogue-ap enable
configure either syslog or trap or both to receive the rogue APs detected.
SMC AP(if-wireless g)#rogue-ap duration 200
SMC AP(if-wireless g)#rogue-ap interval 120
SMC AP(if-wireless g)#rogue-ap scan
SMC AP(if-wireless g)#rogueApDetect Completed (Radio G) : 5 APs detected
rogueAPDetect (Radio G): refreshing ap database now
SMC AP(if-wireless g)#exit
SMC AP#show rogue-ap
802.11a Channel : Rogue AP Status
AP Address(BSSID)
=======================================================
802.11g Channel : Rogue AP Status
AP Address(BSSID)
=======================================================
00-04-e2-2a-37-23
00-04-e2-2a-37-3d
00-04-e2-2a-37-49
00-90-d1-08-9d-a7
00-30-f1-fb-31-f4
SMC AP#
SSID Channel(MHz) RSSI
SSID Channel(MHz) RSSI
WLAN1AP 11(2462 MHz)
ANY 7(2442 MHz)
WLAN1AP 9(2452 MHz)
WLAN1AP 1(2412 MHz)
WLAN 6(2437 MHz)
Radio Interface
7-116
7-118
7-118
7-119
7-120
17
42
42
12
16
6
7-90
6-57