Antenna Location - SMC Networks EliteConnect SMC2891W-AG User Manual

7
Command Line Interface
Command Mode
Interface Configuration (Wireless)
Command Usage
• See "External Antenna Options" on page 1-5 for a list of the available
antenna options and their part numbers.
• The optional external antennas (if any) that are certified for use with the
access point are listed by typing antenna control id ?. Selecting the
correct antenna ID ensures that the access point's radio transmissions are
within regulatory power limits for the country of operation.
• The antenna ID must be selected in conjunction with the antenna control
method to configure proper use of any of the antenna options.
• If there is no integrated antenna on the unit for the wireless interface, the
default setting is indicated as "id=0x0000, module=NA."
Example
SMC AP(if-wireless g)#antenna id ?
id=0x0000, module=NA
id=0x0106, module=ACC04-050090 Directional Panel Ant.
id=0x0107, module=ACC04-05028A Omni-Directional Ant.
id=0x0108, module=ACC04-05427A Omni-Directional Ant.
id=0x0109, module=ACC04-053830 0 Degree Sector Ant.
SMC AP(if-wireless g)#antenna id 0000
SMC AP(if-wireless g)#

antenna location

This command selects the antenna mounting location for the radio interface.
Syntax
antenna location <indoor | outdoor>
• indoor - The antenna is mounted indoors.
• outdoor - The antenna is mounted outdoors.
Default Setting
Indoor
Command Mode
Interface Configuration (Wireless)
Command Usage
• Selecting the correct location ensures that the access point only uses radio
channels that are permitted in the country of operation.
Example
SMC AP(if-wireless g)#antenna location indoor
SMC AP(if-wireless g)#
7-104