Table of Contents
Advertisement
6
Command Line Interface
configure
This command activates Global Configuration mode. You must enter this mode to
modify most of the settings on the access point. You must also enter Global
Configuration mode prior to enabling the context modes for Interface Configuration.
See "Using the Command Line Interface" on page 1.
Default Setting
None
Command Mode
Exec
Example
Enterprise AP#configure
Enterprise AP(config)#
Related Commands
end (6-8)
end
This command returns to the previous configuration mode.
Default Setting
None
Command Mode
Global Configuration, Interface Configuration
Example
This example shows how to return to the Configuration mode from the Interface
Configuration mode:
Enterprise AP(if-ethernet)#end
Enterprise AP(config)#
exit
This command returns to the Exec mode or exits the configuration program.
Default Setting
None
Command Mode
Any
6-8
Advertisement
Table of Contents
