Remove The Rails From The Rack; Common Components - Lenovo ThinkSystem SR675 V3 User Manual

Thumbscrew
1
After you finish
1. Reconnect the power cords and any cables that you removed.
2. Power on the server and any peripheral devices. See
3. Update the server configuration. See

Remove the rails from the rack

Follow instructions in this section to remove the rails from the rack.
Step 1. Remove the rails from the rack.
Rack Front
Latch
1
Pull the latch towards the flange holes.
Slide the rail backward to disengage pins from
the flange holes.

Common components

Follow instructions in this section to remove and install common components in chassis.
Notes:
• The illustrations in this document are for reference only and might differ slightly from your hardware.
• The replacement procedures in this section uses the 4-DW GPU Model as an example, the replacement
procedures for the 8-DW GPU Model are similar.
ThinkSystem SR675 V3 User Guide
64
"Power on the server" on page
"Complete the parts replacement" on page
Rack Rear
1
the flange holes.
53.
194.
Latch
Pull the latch towards the flange holes.
Slide the rail backward to disengage pins from