Lenovo ThinkSystem SR675 V3 User Manual page 83

CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted
with metal, which might result in spattered metal, burns, or both.
Attention:
• Read "Installation Guidelines" on page 45
work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
Watch the procedure
A video of this procedure is available at YouTube:
AgTVLhsU24Nhel3_oYlnGT
Procedure
Step 1. Align the connector on the cable with that on the server and push it in.
Note: Depending on your configuration, the server and the location of the connector might look
different from those shown in the illustrations.
Figure 40. Connecting the external diagnostics handset cable
Step 2. Attach the external diagnostics handset to a metal surface with the magnetic bottom.
and "Safety inspection checklist" on page 46
.
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
Chapter 5 Hardware replacement procedures
to ensure that you
75