Figure 77. PCIe riser locations
•
"Remove a PCIe riser without serial port module" on page 111
•
"Remove PCIe riser 1 installed with serial port module" on page 112
•
"Remove PCIe riser 2 installed with serial port module" on page 113
Remove a PCIe riser without serial port module
Procedure
Step 1.
Make preparation for this task.
a.
Remove the top cover. See
b.
Disconnect the cables that are connected to the PCIe riser and the PCIe adapter.
Step 2.
Remove the PCIe riser.
a.
Unfasten the thumbscrew on the PCIe riser.
b.
Lift the PCIe riser out of the chassis.
Figure 78. PCIe riser removal (without serial port module)
After you finish
1. If no PCIe riser is going to be installed to the chassis, install a riser filler into the chassis. See
PCIe riser" on page
"Remove the top cover" on page
115.
154.
.
Chapter 5
Hardware replacement procedures
"Install a
111