Lenovo ThinkSystem SR675 V3 User Manual page 87

Step 1. Make preparation for this task.
a. Remove the top cover. See
b. Remove all of the fans. See
Step 2. Remove the fan cage.
a. Rotate the two release latches on the fan cage up to disengage it from the chassis.
b. Hold the handles, and lift the fan cage out of the chassis.
Figure 44. Fan cage removal
After you finish
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the fan cage
Follow instructions in this section to install the fan cage.
About this task
Attention: Read "Installation Guidelines" on page 45
that you work safely.
Watch the procedure
A video of this procedure is available at YouTube:
AgTVLhsU24Nhel3_oYlnGT
Procedure
Step 1. Align the guide slots on the fan cage with the guide pins on the chassis, and lower the fan cage
into the chassis.
Step 2. Rotate the two release latches down until they stop.
"Remove the top cover" on page
"Remove a fan" on page
.
154.
76.
and "Safety inspection checklist" on page 46
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
Chapter 5 Hardware replacement procedures
to ensure
79