• Press the power button to start an orderly shutdown (if supported by your operating system).
• Press and hold the power button for more than 4 seconds to force a shutdown.
When in a standby state, the server can respond to remote power-on requests sent to the Lenovo XClarity
Controller. For information about powering on the server, see
Server replacement
Follow instructions in this section to remove and install the server.
•
"Remove the server from rack" on page 43
•
"Install the server to rack" on page 46
Remove the server from rack
Follow instructions in this section to remove the server from the rack.
S036
18 - 32 kg (39 - 70 lb)
CAUTION:
Use safe practices when lifting.
R006
CAUTION:
Do not place any object on top of a rack-mounted device unless that rack-mounted device is intended
for use as a shelf.
About this task
Attention:
• Read
"Installation Guidelines" on page 35
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
CAUTION:
Make sure to have three people operate the server removal procedures to prevent injury.
Watch the procedure
32 - 55 kg (70 - 121 lb)
and
"Safety inspection checklist" on page 36
42.
"Power on the server" on page
.
Chapter 5
Hardware replacement procedures
42.
to ensure that you
43