Lenovo ThinkSystem SR675 V3 User Manual page 123

• Read "Installation Guidelines" on page 45
work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
Watch the procedure
A video of this procedure is available at YouTube:
AgTVLhsU24Nhel3_oYlnGT
Procedure
Step 1. Open the retention latch on the PCIe riser.
Step 2. Install the PCIe adapter.
a. Insert the PCIe adapter into the PCIe riser.
b. Fasten the screw to secure the PCIe adapter to the PCIe riser.
c. Close the retention latch.
Figure 82. PCIe adapter installation
After you finish
1. Reinstall the PCIe riser. See
2. Complete the parts replacement. See
Install a PCIe riser
Follow instructions in this section to install a PCIe riser.
About this task
Attention:
• Read "Installation Guidelines" on page 45
work safely.
and "Safety inspection checklist" on page 46
.
"Install a PCIe riser" on page
"Complete the parts replacement" on page
and "Safety inspection checklist" on page 46
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
115.
.
Chapter 5 Hardware replacement procedures
to ensure that you
194.
to ensure that you
115