Lenovo ThinkSystem SR675 V3 User Manual page 26

Front view with 4x E3.S 1T drives
Figure 4. Front view with 4x E3.S 1T drives
Table 4. Components on the front view with 4x E3.S 1T drives
EDSFF drive cage cover
1
Front operator panel
2
Drive activity LED (green)
3
Drive status LED (yellow)
4
EDSFF drive cage cover
1
The 8-DW GPU Model servers should always operate with the EDSFF drive cage cover installed to the
chassis.
Front operator panel
2
For more information about the front operator panel, see
3 Drive activity LED (green)
Each hot-swap drive comes with an activity LED. When this LED is flashing, it indicates that the drive is in
use.
4 Drive status LED (yellow)
The drive status LED indicates the following status:
• The LED is lit: the drive has failed.
• The LED is flashing slowly (once per second): the drive is being rebuilt.
• The LED is flashing rapidly (three times per second): the drive is being identified.
5 PCIe slot 3-10
Install PCIe adapters, particularly GPUs to these slots. These PCIe slots support the following configuration:
• PCIe Gen5 x16, FH/FL
6 PCIe slot 1-2
ThinkSystem SR675 V3 User Guide
18
PCIe slot 3-10
5
PCIe Slot 1-2
6
E3.S 1T hot-swap drive bays (0 to 3)
7
"Front operator panel LEDs" on page 227.