Lenovo ThinkSystem SR675 V3 User Manual page 155

Figure 112. System board assembly installation
2. Install the following components as illustrated:
• Two screws on the cable wall bracket (with PH2 screwdriver)
• Eleven screws on the system board assembly (with PH1 screwdriver)
Figure 113. System board assembly installation
3. Install the following components as illustrated:
• Two spacers (with 8 mm wrench)
• Five guide pins (with 7 mm wrench)
• Two hex nuts (with 5 mm wrench)
• One lifting handle (with PH2 screwdriver)
.
Chapter 5 Hardware replacement procedures
147