Figure 41. Attaching the external diagnostics handset to a metal surface
After you finish
Complete the parts replacement. See
Fan replacement
Follow instructions in this section to remove or install a fan.
Remove a fan
Follow instructions in this section to remove a fan.
About this task
Attention:
• Read
"Installation Guidelines" on page 45
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
• If the server is installed in a rack, slide the server out on its rack slide rails to gain access to the top cover,
or remove the server from the rack. See
Watch the procedure
A video of this procedure is available at YouTube:
AgTVLhsU24Nhel3_oYlnGT
Procedure
Step 1.
Remove the top cover. See
Step 2.
Remove the fan.
ThinkSystem SR675 V3 User Guide
76
"Complete the parts replacement" on page
and
"Safety inspection checklist" on page 46
54.
"Remove the server from rack" on page
.
"Remove the top cover" on page
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
154.
194.
to ensure that you
54.