Lenovo ThinkSystem SR675 V3 User Manual page 139

Step 2. Slightly lift up the rail frame in the direction shown. The processor in the rail frame is spring-
loaded.
Step 3. Hold the blue tab of the processor carrier and slide the processor carrier out of the rail frame.
Figure 96. Processor removal
After you finish
1. If you are going to install a new processor. See
2. Empty processor socket must always contain a socket cover and a filler before the server is powered on.
3. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Install a processor
Follow instructions in this section to install a processor. This task requires a Torx T20 driver. The procedure
must be executed by a trained technician.
About this task
Attention:
• Read "Installation Guidelines" on page 45
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Notes:
• See https://serverproven.lenovo.com
the system board assembly must have the same speed, number of cores, and frequency.
• Before you install a new processor, update your system firmware to the latest level. See
firmware" on page 217.
Firmware and driver download: You might need to update the firmware or driver after replacing a
component.
• Go to https://datacentersupport.lenovo.com/tw/en/products/servers/thinksystem/sr675v3/7d9q/downloads/
to see the latest firmware and driver updates for your server.
driver-list/
"Install a processor" on page
and "Safety inspection checklist" on page 46
54.
for a list of processors supported for your server. All processors on
131.
.
Chapter 5 Hardware replacement procedures
to ensure that you
"Update the
131