Chapter 6. Internal cable routing
See this section to do cable routing for specific components.
Note: Disengage all latches, release tabs, or locks on cable connectors when you disconnect cables from
the system board assembly. Failing to release them before removing the cables will damage the cable
sockets on the system board assembly, which are fragile. Any damage to the cable sockets might require
replacing the system board assembly.
Identifying connectors
See this section to locate and identify the connectors on the electric boards.
Drive backplane connectors
See this section to locate the connectors on the drive backplanes.
Three types of drive backplanes are supported in this server:
The 4-DW GPU Model supports:
•
"8x 2.5-inch SAS/SATA/NVMe backplane" on page 196
The 8-DW GPU Model supports:
•
"6x E1.S NVMe backplane" on page 196
•
"4x E3.S NVMe backplane" on page 197
© Copyright Lenovo 2023, 2023
195