Lenovo ThinkSystem SR675 V3 User Manual page 89

Step 2. Remove the flash power module.
a. Open the retention latch on the PCIe riser.
b. Unfasten the screw that secures the flash power module holder bracket to the PCIe riser.
c. Remove the holder bracket from the PCIe riser.
d. Press and release the retaining latch.
e. Remove the flash power module from the holder.
Figure 46. Flash power module removal
After you finish
1. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
2. If you plan to remove or recycle the flash power module holder:
a. Remove the holder from the bracket.
1) Remove the screw that secures the holder to the bracket.
2) Slide the holder forward slightly to disengage it from the bracket, and remove the holder.
.
Chapter 5 Hardware replacement procedures
81