Lenovo ThinkSystem SR675 V3 User Manual page 153

Figure 110. System I/O board removal
After you finish
1. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Important: Before you return the processor board, make sure that you install the processor socket
covers from the new processor board. To replace a processor socket cover:
a. Take a socket cover from the processor socket assembly on the new processor board and orient it
correctly above the processor socket assembly on the removed processor board.
b. Gently press down the socket cover legs to the processor socket assembly, pressing on the edges to
avoid damage to the socket pins. You might hear a click on the socket cover is securely attached.
c. Make sure that the socket cover is securely attached to the processor socket assembly.
2. If you plan to recycle the component, see
page 259.
Install the system I/O board or processor board
Follow instructions in this section to install the system I/O board or processor board.
About this task
Important: Removing and installing this component requires trained technicians. Do not attempt to remove
or install it without proper training.
Attention:
• Read "Installation Guidelines" on page 45
work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
Note: Make sure you have SR675 V3 Misc Kit available to replace the system I/O board and processor
board.
Firmware and driver download: You might need to update the firmware or driver after replacing a
component.
• Go to
https://datacentersupport.lenovo.com/tw/en/products/servers/thinksystem/sr675v3/7d9q/downloads/
to see the latest firmware and driver updates for your server.
driver-list/
"Disassemble the system board assembly for recycle" on
and "Safety inspection checklist" on page 46
Chapter 5
to ensure that you
.
Hardware replacement procedures
145