Lenovo ThinkSystem SR675 V3 User Manual page 154

• Go to "Update the firmware" on page 217
Watch the procedure
A video of this procedure is available at YouTube:
AgTVLhsU24Nhel3_oYlnGT
Procedure
Step 1. Depending on the needs, do one of the following:
• If you are going to replace the system I/O board and reuse the processor board, install a new
system I/O board onto the processor board.
• If you are going to replace the processor board and reuse the system I/O board, install the
existing system I/O board onto a new processor board.
a. Install the system I/O board onto the processor board.
1. Align the system I/O board with the connector on the processor board, and use both
hands to push the system I/O board and slightly insert it into the connector.
Note: To prevent the contact of the system I/O board from damage, ensure that the
system I/O board is aligned correctly with the connector on the processor board, and
remains as horizontal as possible during the insertion.
Figure 111. System I/O board installation
b. Install the system board assembly to the supporting sheet metal.
1. Lower the system board assembly into the supporting sheet metal.
ThinkSystem SR675 V3 User Guide
146
for more information on firmware updating tools.
.
https://www.youtube.com/playlist?list=PLYV5R7hVcs-