Lenovo ThinkSystem SR675 V3 User Manual page 201

Figure 158. Link connector cover removal
Step 2. Align the GPU adapter link bridge to the link connectors on the GPU adapters; then, install the GPU
adapter link bridge to the GPU adapters until it clicks into place.
Note: Depending on the configuration, there may be one or three GPU adapter link bridges on the
GPU adapter. When linking a GPU pair, all link connectors on the GPU adapters must be linked.
Figure 159. GPU adapter link bridge installation
After you finish
Complete the parts replacement. See "Complete the parts replacement" on page 194.
.
Chapter 5 Hardware replacement procedures
193