Lenovo ThinkSystem SR675 V3 User Manual page 132

Attention:
• Read "Installation Guidelines" on page 45
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
• Make sure you have a power supply unit filler available if some power supply bays will be left empty after
the removal.
Watch the procedure
A video of this procedure is available at YouTube:
AgTVLhsU24Nhel3_oYlnGT
Procedure
Step 1. Press and hold the terra-cotta release tab.
Step 2. Grasp the handle, and pull the power supply unit out of the server.
Figure 91. Power supply unit removal
After you finish
1. Install a power supply or power supply filler as soon as possible. See
page 124.
Important: During normal operation, each power supply bay must contain either a power supply unit or
a power supply filler for proper cooling.
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Install a power supply unit
Follow instructions in this section to install a power supply unit.
ThinkSystem SR675 V3 User Guide
124
and "Safety inspection checklist" on page 46
54.
.
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
"Install a power supply unit" on
to ensure that you