Omron M1 Series User Manual page 255

FJOG
RJOG
FW
RV
Output
frequency
FJOG, RJOG ON while FW, RV are ON
Fig.: Jogging operation by FJOG and RJOG terminals while inverter is running
• When the FJOG (Forward rotation jogging) terminal and RJOG (Reverse rotation jogging) termi-
nal are both ON, operation is the same as when they are both OFF.
• Operation during a stop follows the setting of Jogging Operation Selection (301FHex-0CHex),
though the enabled/disabled during operation settings are not affected.
• FJOG (Forward rotation jogging) terminal and RJOG (Reverse rotation jogging) terminal are giv-
en priority over jogging operation by the FW terminal/RV terminal and the JG terminal.
Parameter No.
3005Hex-02Hex to
3005Hex-06Hex,
3005Hex-63Hex,
3005Hex-64Hex
• Operation when the FW and RV terminals turn ON while the FJOG and RJOG terminals are ON
is as follows.
FJOG
RJOG
FW
RV
3006Hex-
Output
15Hex
frequency
FW, RV ON while FJOG, RJOG are ON
• Combinations of the JG terminal and FJOG terminal, RJOG terminal while jogging during opera-
tion is enabled act as follows.
M1 Series EtherCAT Type User's Manual (I670)
Normal Normal
operation operation
3008Hex-
3008Hex-
38Hex
38Hex
*1 *1
3006Hex-
15Hex
3008Hex-37Hex
-3006Hex-15Hex
FJOG priority RJOG priority
Function name
Input Terminal [DI1] to
[DI7] Function Selection
Normal
operation
*1 *2
3008Hex-37Hex
3008Hex-37Hex
-3006Hex-15Hex
FJOG RJOG
priority priority
3006Hex-
15Hex
3008Hex-37Hex
3008Hex-38Hex
3008Hex-
-3006Hex-
38Hex
15Hex
*1
FJOG, RJOG
3008Hex-
simultaneous
38Hex
operation
Normal
RJOG priority FJOG priority
operation
Data
94: FJOG (Forward rota-
tion jogging)
95: RJOG (Reverse rota-
tion jogging)
Normal operation
*1 *2
*2
RJOG *1: Acceleration at normal operation
priority *2: Deceleration at normal operation
6 Basic Settings
*1: Acceleration at normal operation
*2: Deceleration at normal operation
*2
*1
*2
Normal
operation
Default da-
Unit
ta
- -
6-57
6