Omron M1 Series User Manual page 786

Appendices
Event name Output Phase Loss Error
Meaning There is an output phase loss.
Source EtherCAT Master Function Mod-
ule
Error attrib- Level
utes
Effects User program
Indicators EtherCAT NET RUN
---
System-de- Variable
fined varia-
None
bles
Cause and Assumed cause
correction
(1) The inverter's output wiring is
disconnected.
(2) The motor winding is broken.
(3) The inverter output terminals
are not firmly tightened.
Attached in- None
formation
Precautions/ None
Remarks
A-240
Source details Slave
Minor fault Recovery
Continues. Operation
EtherCAT NET ERR
---
Data type
None
Correction
Measure the output current.
→ Replace the output wiring.
Measure the output current.
→ Replace the motor.
Check if there are loose screws
on the inverter output terminals.
→ Retighten the screws to the
recommended tightening torque.
Event code 28100000 hex
Detection tim-
ing
Error reset Log category
Motor stops.
EtherCAT LINK/ACT
---
Name
None
Prevention
None
None
Tighten the screws to the recom-
mended tightening torque.
M1 Series EtherCAT Type User's Manual (I670)
Continuously
System log