Dialing Rules 2; Figure 4-23.Dialing Rules 2 Screen - Polycom ViewStation EX User Manual

ViewStation EX User Guide

Dialing Rules 2

128
If both the caller and the called party are on your Private
Network, as indicated by enabling the Private Network Access
option, then the Address Book of the calling site (through the
Global Directory Server) will show the private numbers of the
site being called if they are entered in the Private Network
ISDN Number screen (System Info > Admin Setup >
LAN/H.323 > Global Address > Private Net). In other words, if
both sites have the Private Network Access enabled, then their
address books will show the other parties' private numbers
instead of the normal ISDN number.
For more information about Private Network ISDN Number,
refer to Entering the Private Network Number, on page
Private Network Dialing Prefix—Enter the dialing prefix
required to dial within your private network. This prefix is used
if your system and the system you are calling have access to
your organization's private network.
If your private network requires you to dial prefixes to access
certain area codes (or city codes), you can set those prefixes in the
Dialing Rules 2 screen.
To access the Dialing Rules 2 screen:
Select System Info > Admin Setup > LAN/H.323 > Global Address
> Dialing Rules 2. The following screen appears:
Figure 4-23. Dialing Rules 2 Screen
125.
www.polycom.com