Adding A Telephone Number; Setting The Administrator And Meeting Passwords; Figure 3-15.Telephone Numbers Screen - Polycom ViewStation EX User Manual

ViewStation EX User Guide

Adding a Telephone Number

Setting the Administrator and Meeting Passwords

78
On the Telephone Numbers screen, enter the number of the analog
telephone line that is connected to your system.
Figure 3-15. Telephone Numbers Screen
You can enter the number of another telephone in the same room as
the ViewStation EX system. When you have finished, highlight the
Save icon and press the SELECT button on the remote control.
This screen contains an initial administrator password, which is
your system's serial number. It also has a meeting password that is
randomly generated.
The administrator password allows access to all the Admin Setup
screens using the user interface or the Web interface.
You can change, remove, or keep the initial password.
To change the administrator password:
1. Highlight the password field using the remote control.
Backspace over the initial password (the system's serial
2.
number) using the left arrow key on the remote control.
When the field is empty, start entering your new password as
3.
follows:
Enter numbers using the remote control's keypad.
www.polycom.com