Figure 7-3.Pcpresent Screen - Polycom ViewStation EX User Manual

ViewStation EX User Guide
234
4. Click the Press Here to Select a PowerPoint Presentation
button. The pcPresent dialog box appears.
Figure 7-3. pcPresent Screen
In the pcPresent screen, configure the following options:
5.
a. Enter your name (your host name is here by default).
b. Enter a password...: Enter a presentation password, if you
wish to establish one for the presentation. You will be
prompted later for this password when you select the
presentation.
c. Use NAT Address: Enable or disable the Use NAT Address
option as is appropriate as described below. Use NAT
Address is enabled by default. The Use NAT Address field
only appears if the system detects a NAT device.
– If your PC or laptop is behind a NAT device but the
system is not, make sure that Use NAT Address is
enabled. In addition, you will have to open the
following ports in the NAT device so that the slides can
successfully load into the system:
80 (http port)
21 (ftp control port)
5004 and 65000 ports
– If your PC or laptop and the system are both behind the
same NAT device, disable the option Use NAT
Address.
www.polycom.com