Using The Manual Dialer (Video Phone) - Polycom ViewStation EX User Manual

Using the Manual Dialer (Video Phone)

© Polycom, Inc. 2003
Using the user interface's Manual Dialer (Video Phone). See
Using the Manual Dialer (Video
Using a multi-site local Address Book Meeting entry. See
an Address Book Meeting
Adding existing Address Book entries one at a time. See
the Address Book.
Using a combination of Manual Dialer and Address Book
entries. See Using the Manual Dialer and the Address
In order to place multipoint calls and enable all multipoint-related
capabilities, you must upgrade your system to support multipoint
calls. For more information, refer to
Multipoint Calls in chapter 2.
The following explains how to place a multipoint call manually by
adding sites to your videoconference.
To place the first call:
a. On the main screen, highlight the Video Call icon and press
the SELECT button on the remote control.
b. Use the numeric keypad on the remote control to enter the
number you want to dial in the highlighted field.
When you enter a number using the remote control, you can
hear a voice confirmation of that number from your system.
This feature can be enabled on the General Setup screen by
selecting the Keypad Audio Confirmation option.
Chapter 6 - Using Advanced System Features
Phone).
Entry.
Note
Upgrading the System for
Note
Using
Using
Book.
187