Polycom ViewStation EX User Manual page 141

Chapter 4 - Advanced Configuration for your Network Environment
You can enter the following information on the SNMP Setup screen:
Enable SNMP—Enable or disable SNMP in this field.
Administrator Contact Name—Enter the name of the person
responsible for remote management of this system. The default
setting for this field is "IT Administrator."
SNMP Console IP Address—Enter the IP address of the SNMP
traps sent by the system. Enter 0.0.0.0 in this field if any SNMP
management console is capable of receiving information from
this agent.
Location Name—Enter the location of the system. This field
defaults to your system's name@your country name.
Community Name—Enter the SNMP management community
in which you want to enable this agent. The default setting for
this field is "Public."
System Description—This field displays the type of
videoconferencing device. You cannot edit this field.
© Polycom, Inc. 2003 139