Configuration For Isdn (H.320) Calls; Advanced V.35/Rs-449/Rs-530 Network Interface Configuration - Polycom ViewStation EX User Manual

Configuration for ISDN (H.320) Calls

Advanced V.35/RS-449/RS-530 Network Interface
Configuration
© Polycom, Inc. 2003
Chapter 4 - Advanced Configuration for your Network Environment
This section contains advanced ISDN configuration information for
the V.35/RS-449/RS-530 and BRI network interfaces. The
information displayed on the various ISDN configuration screens
varies according to the network interface that is attached to your
ViewStation EX system.
The configuration information is divided into:
Advanced V.35/RS-449/RS-530 Network Interface
Configuration
Advanced Quad BRI Network Interface Configuration
Once your ISDN configuration is complete, you may want to place
a test call. For information about placing a call, refer to
on page 148.
This section describes information and settings for the following
advanced V.35/RS-449/RS-530 configuration screensR:
Advanced V.35 (Setup). See
V.35/RS-449/RS-530 Serial Interface Control Signals, on page
104.
Broadcast Mode. See
Mode, on page
Dialing Speeds. See
Advanced Dialing (Calling Profile, Prefix, Suffix). See
the Calling Profile, on page
Crypto Resync Pulse. See
The V.35/RS-449/RS-530 network interface supports the V.35,
RS-449, or RS-530 protocol depending on the cable you use to
Configuring the
Setting up Satellite (H.331) Broadcast
105.
Selecting Dialing Speeds, on page
108.
Enabling Crypto Resync on page
Notes
Video Calls
106.
Setting
110.
103