Configuring Snmp Preferences; Figure 4-28.Snmp Setup Screen - Polycom ViewStation EX User Manual

ViewStation EX User Guide

Configuring SNMP Preferences

138
SNMP (Simple Network Management Protocol) is a set of protocols
used to manage complex networks. SNMP tells the network if a
device or operation is functioning properly. The ViewStation EX
sends SNMP reports on the following:
Low battery power in the remote control.
System is being powered on after a long time powered off.
Authentication failure—someone is attempting to log in as an
administrator with the wrong password.
Authentication success—someone has logged on successfully as
an administrator.
Call failed for reason other than a busy line.
A user has asked for help from the Technical Assistance Center.
A system is in a telephone or video call.
A telephone or video call has disconnected.
To access the SNMP Setup screen:
Select System Info > Admin Setup > LAN/H.323 > SNMP. The
SNMP Setup screen appears.
Figure 4-28. SNMP Setup Screen
www.polycom.com