ViewStation EX User Guide
LAN/Intranet
Symptom
Cannot access the
system from the PC
browser.
System does not allow
management via the
Web.
272
Cause
DHCP Client is ON and no DHCP
server is available.
The LAN cable is connected to the
PC port.
Bad LAN cable.
There is a firewall between your
PC and your system.
Your PC is on a different subnet
and there is a router between you
and your system.
Wrong password.
Too many managers are logged
into the system.
Solution
Contact your network administrator.
Connect the LAN cable to the LAN
port on the rear of the system.
Check the light on the back of the
system. You should have a steady
green light to indicate a connection to
the LAN and a flashing orange light
to indicate LAN traffic.
Consult your network administrator.
Change your PC or system subnet
mask and IP address so that they are
both on the same LAN or subnet.
Enter the correct password. Note:
The default password is "admin."
Only two system managers are
allowed at any one time. To log
everyone out, restart your system.
www.polycom.com
Need help?
Do you have a question about the ViewStation EX and is the answer not in the manual?