Adjusting Camera Settings; Setting Camera Presets - Polycom ViewStation EX User Manual

ViewStation EX User Guide

Adjusting Camera Settings

Setting Camera Presets

170
To tilt or pan the camera:
Use the arrow buttons on the remote control to tilt the camera up
and down and to pan from side to side.
To zoom:
Use the ZOOM buttons on the remote control to zoom in and out.
To go to a menu screen while in a call:
While in a call, if you have to go to a menu screen to make some
adjustments, pressing the NEAR or FAR button on the remote
control returns you to your call view.
You can adjust the settings of your cameras from the Cameras
screen.
To access this screen:
Select System Info > Admin Setup > Video/Camera > Cameras.
The options available on the Cameras screen are described in the
section Video and Cameras Screens on page
You can set and store up to ten preset camera positions. These ten
camera presets can be distributed across the far camera and up to
four near-site cameras.
To set a camera preset:
1. Press the NEAR or FAR button on the remote control to select
the near or far camera.
305.
www.polycom.com