Upgrading The System For Multipoint Calls - Polycom ViewStation EX User Manual

Upgrading the System for Multipoint Calls

© Polycom, Inc. 2003
informed of the progress of your update. Do not turn your
system off during this process.
The software update application will terminate if there are too many
errors on the communication line. The system you are updating will
revert back to the previous software version. If your software does
not update, try using a lower data rate.
Once the software upgrade process completes, your system will
4.
automatically restart and the main calling screen will appear. If
you have purchased an MP upgrade key for multipoint calls,
please refer to Upgrading the System for Multipoint Calls on
page 55 for instructions on entering the key.
If you have purchased an MP upgrade key from Polycom, you can
upgrade your ViewStation EX to support multipoint calls.
For more information about making multipoint calls, please refer to
Multipoint Calls (Optional).
To enter the MP key:
1. From the main calling screen, go to System Info>Admin
Setup>Software/Hardware>System Options.
2. Enter your multipoint key.
When MP is enabled, the Multipoint field changes from
Disabled to Enabled.
Press Select on the remote to make the keyboard appear. Your
key will be 20 characters long. Enter five characters in each box.
The cursor will move automatically to the next box as you add
Chapter 2 - Installing the ViewStation EX
Note
Note
55