What You Need To Install The Viewstation Ex System; Television Monitors; Network Interfaces; Ethernet - Polycom ViewStation EX User Manual

ViewStation EX User Guide
What you Need to Install the ViewStation EX
System

Television Monitors

Network Interfaces

Ethernet

ISDN

30
This section lists the additional items you need to install the
ViewStation EX system. It also provides a checklist of information
you should have on hand during the installation process.
For details about the system components, see the QuickStart card
provided with each system.
You can use the ViewStation EX with two television monitors and a
VGA monitor that operates at 75 Hz or higher with a resolution of
800 x 600, 1024 x 768, or 1280 x 1024.
The ViewStation EX system can use any S-video or composite
television monitor as the primary monitor. The other monitor has to
be S-video.
The size of the monitor should be proportional to the size of the
room where video conferences take place.
A Local Area Network (LAN) Ethernet connection is needed if you
plan to use IP.
If you are using one of the following ISDN network interfaces with
your system, you will need the appropriate network equipment and
access to services for the specified network interface:
www.polycom.com