Polycom ViewStation EX User Manual page 55

© Polycom, Inc. 2003
For Windows NT 4.0:
Right-click the Network Neighborhood icon, and then
a.
right-click Properties.
b. When the Network screen appears, select the Protocols tab,
then double-click TCP/IP Protocol.
Select the IP Address tab. Make sure the Specify and IP
c.
Address button is selected.
d. Enter the following information:
IP address = 1.1.1.3
–
– Subnet mask = 255.255.255.0
e. Then click OK.
For Windows 2000:
a. Right-click the My Network Places icon, and then
right-click Properties.
b. In the Network and Dial-up Connections window,
right-click Local Area Connection, and select Properties.
c. In the Local Area Connection Properties window,
double-click Internet Protocol (TCP/IP).
d. In the Internet Protocol (TCP/IP) Properties window, make
sure the Use the following IP address button is selected.
e. Enter the following information:
– IP address = 1.1.1.3
– Subnet mask = 255.255.255.0
f. Then click OK.
5. Restart your PC and insert the update CD into your drive.
Access the Sofupdate.exe file, as follows:
• From the Update CD: Insert the update CD into your drive.
• From the Polycom Web site: 1. Go to the software download
center at www.polycom.com. 2. Locate your product name
and provide the required information. 3. Run the
Softupdate application to download the latest software and
Chapter 2 - Installing the ViewStation EX
53