Crypto Resync Pulse; Software And Hardware Screens - Polycom ViewStation EX User Manual

Crypto Resync Pulse

Software and Hardware Screens

© Polycom, Inc. 2003
Enable Remote Access—This option gives administrator the
the capability to lock out access to FTP, Web, Telnet, and SNMP.
The FTP, Web, Telnet, and SNMP options are enabled by
default.
Crypto Resync—This option is only available if a
V.35/RS-449/RS-530 network interface is attached to your
system.
This screen is specific to a ViewStation EX system with a
V.35/RS-449/RS-530 network interface.
To access the Crypto Resync Pulse screen:
1. Select System Info>Admin Setup>Security.
2. In the Security screen, select the Crypto Resync option.
For more configuration information, refer to
Resync on page 110.
To access the Software, RS-232, Hardware Information, Send
Address Book, and Far Site Software Update, and System
Options screens:
Select System Info > Admin Setup > Software/Hardware.
Appendix A - Screen Reference
Note
Enabling Crypto
313