Telephone & Audio; Figure A-4.Telephone & Audio Screen - Polycom ViewStation EX User Manual

ViewStation EX User Guide
Telephone & Audio
304
The Telephone & Audio screen is used to configure the ViewStation
EX system telephone information and audio properties.
To access the Telephone & Audio screen:
Select System Info > Admin Setup > Phone/Audio.
Figure A-4. Telephone & Audio Screen
The following options are displayed on the screen:
System Telephone Number—Enter the Country Code, Area
Code, and Number associated with the system telephone
number.
Room Telephone Number— You can also enter the telephone
number that is assigned to the room where the system is
located.
Echo Canceller—This option is enabled by default. It prevents
users from hearing their voice loop back from the remote site.
Disable this option if another device is providing echo
cancellation.
Mute Auto Answer Calls—You can mute or un-mute incoming
calls. Incoming calls are muted by default until you press the
button on top of the microphone pod or press the mute button
on the remote control.
www.polycom.com