Enabling Netmeeting On The Viewstation Ex; Accessing Netmeeting - Polycom ViewStation EX User Manual

ViewStation EX User Guide

Enabling NetMeeting on the ViewStation EX

Accessing NetMeeting

246
If additional participants want to join a NetMeeting conference,
they can place a NetMeeting call to the IP address of either PC
in the call.
The following describes how to enable your system's data
conferencing capabilities.
To enable NetMeeting on your system:
1. Select System Info > Admin Setup > Data Conference. The
Data Conference screen appears.
2. Enable either the NetMeeting or the T.120 device option. The
ShowStation IP option appears only if a ShowStation IP is
connected to your system or the LAN.
To access NetMeeting:
Place a point-to-point ISDN (H.320) call to the remote site. Make
1.
sure the remote site has also placed a call to the local site.
Open Internet Explorer 5.5 or higher or Netscape 6.0 or higher
2.
on your PC and enter the IP address of your system in the
Address field of your browser. your system's Web interface
main page appears on your PC.
3. Click the Configure NetMeeting icon.
If an admin password is required, the Enter Network Password
window appears. The following information is needed:
a. Enter your name in the User Name field (use "admin" as
the user name).
b. Enter the admin password in the Password field. This
password is set in the Security screen (System Info >
Admin Setup > Security) of your system.
www.polycom.com