Chapter 7: Configuring the Emulation Probe
Configuration items
To set the memory read delay time
(PowerPC 603e, 603ev, 603e2, 603P, 603ec, 603R, 740,
750, 750M, 740P, 750P)
The memory read delay setting delays the number of microseconds specified
during memory reads. It is provided for accessing slow devices like memory
mapped I/O.
The delay should be set to the smallest number possible for best performance
since it delays all reads by the number of microseconds specified.
Memory Read Delay Time
Command
cf mrddel= <delay in microseconds>
Example: cf mrddel=100 (creates 100 µ sec delay).
Values
0-10 000 000 (Default = no delay)
92
Agilent Technologies Emulation for the PowerPC 400/600/700