Setup Flowchart
Emulation module
Install emulation
module
(if necessary)
Connect emulation
probe to emulation
module
Connect emulation
probe to LAN
Install software on
logic analysis system
Agilent Technologies Emulation for the PowerPC 400/600/700
Emulation probe
Connect power
supply
Connect to LAN
Update emulation
probe firmware
(if necessary)
Connect emulation probe
to target system
or analysis probe
Installation done. Begin
making measurements.
Chapter 1: Overview
Setup Flowchart
Emulation migration
Install new target
board adapter and
front panel in
emulation probe
E8130F03.VSD
15