Using the memory tests with an Agilent 16700 logic
analysis system
1 Connect to the emulator. See "Using the Emulation Probe" on page 82
for step-by-step instructions.
2 From the menu bar select Window,
then select the emulator,
and select Memory....
3 Select the Memory Test... button and set up the test in the window that
appears.
4 Select the test type and set the parameters in the window that appears.
5 For help using the memory tests select Help from the menu bar,
then select On This Window.
Agilent Technologies Emulation for the PowerPC 400/600/700
Chapter 9: Testing Target System Memory
Two ways to run the memory tests
95