To Install The Emulation Migration - Agilent Technologies E5900B User Manual

CAUTION:
1 Turn off power to the emulation probe.
2 Disconnect all cables from the emulation probe, including the power
3 Remove the cover from the emulation probe:
Chapter 11: Installing an Agilent E5902B Emulation Migration Kit

To install the emulation migration

Electrostatic discharge can damage electronic components. Use grounded
wrist straps and mats.
The tools necessary for this procedure are supplied with the emulation
migration kit.
cord, LAN cable, serial cable, module/probe interconnect cable, and
target cable.
a Remove the 2 nuts and 2 screws from the front of the emulation
probe.
Agilent Technologies Emulation for the PowerPC 400/600/700 119