Chapter 13: Specifications and Characteristics
Input/Output Electrical Characteristics
Input/Output Electrical Characteristics
Trigger Out SMB Port
With a 50 Ω load, a logic high is ≥ 2.0 V, and a low is ≤ 0.4 V. The output
"To configure the Trigger Out SMB port (All
function is selectable (see
processors)" on page 98
).
Break In SMB Port
Edge-triggered TTL level input, 20 pF, with 4.6 k Ω to ground in parallel.
Maximum input: +5 V to -5 V when the emulation probe is powered OFF; +10
V to -5 V when the emulation probe is powered ON. Input function is
"To configure the Break In SMB port (All processors)" on
selectable (see
page 97
).
Communication Ports
Serial Port
RJ12 connector (DB9-to-RJ12 adapter and serial cable included).
RS-232 DCE to 9600 baud, 8-bit, no parity, one stop bit.
IEEE 802.3 Type 10/100Base-TX LAN Port
RJ-45 connector, is compatible with both 10 Mbps (10Base-T) and 100 Mbps
(100Base-TX) twisted-pair ethernet LANs.
Power Supply
Input.
100-240 V, 1.0 A, 50/60 Hz, IEC 320 connector.
Output.
12 V, 3.3 A
CAT I (Mains isolated).
Agilent Technologies Emulation for the PowerPC 400/600/700
167