Using the emulation probe with a 16700-series logic analysis system via an emulation module
Using the emulation probe with a 16700-series
logic analysis system via an emulation module
The following instructions explain how to control the emulation probe through
an Agilent 16700-series logic analysis system which has an emulation module
installed.
1 Select the emulation module icon in the System window.
2 Select Connect to Emulator... from the menu choices.
3 Select the Connect to Emulator button.
4 The emulation Run Control window will appear, which lets you use the
Emulation Control Interface.
Agilent Technologies Emulation for the PowerPC 400/600/700
Chapter 8: Using the Emulation Probe
85