To Install The Software From Cd-Rom - Agilent Technologies E5900B User Manual

NOTE:
1 If your system uses an external CD-ROM drive, turn on the CD-ROM
2 Insert the CD-ROM in the drive.
3 Select the System Administration icon.
4 Select the Software Install tab.
5 Select Install....
6 Select Apply.
7 From the list of types of packages, double-click "PROC-SUPPORT."
NOTE:
8 Select the POWERPC4XX, POWERPC6XX, or POWERPC7XX package.
Chapter 5: Installing Software on a 16700-Series Logic Analysis System

To install the software from CD-ROM

Installing a processor support package from a CD-ROM will take just a few
minutes. If the processor support package requires an update to the Agilent
Technologies 16700 operating system, installation may take approximately 15
minutes.
The 16700B-series logic analysis systems have internal CD-ROM drives. The
16700A-series logic analysis systems have external CD-ROM drives.
If your system uses an external CD-ROM drive and it is not connected, see the
connection instructions printed on the CD-ROM package.
drive first and then turn on the logic analysis system. Otherwise, simply
turn on the logic analysis system.
If the CD-ROM and analysis system are already turned on, be sure to save any
acquired data. The installation process may reboot the logic analysis system.
Change the media type to "CD-ROM" if necessary.
A list of the processor support packages on the CD-ROM will be displayed.
For touch screen systems, double select the
touching it twice.
If you are unsure whether this is the correct package, select Details for
information about the contents of the package.
56 Agilent Technologies Emulation for the PowerPC 400/600/700
"PROC-SUPPORT"
line by quickly