To Enable Branch Folding (Powerpc 400) - Agilent Technologies E5900B User Manual

To enable branch folding
(PowerPC 400)
This configuration item controls emulation probe behavior when stepping
through assembly language branch instructions.
Branch Folding Configuration
Command
cf brfold=yes
cf brfold=no
Agilent Technologies Emulation for the PowerPC 400/600/700
Chapter 7: Configuring the Emulation Probe
Meaning
The processor is allowed to fold branches and cr logicals
during stepping and running.
Folding a branch results in an automatic jump to the
branch location upon encountering a branch instruction.
(Default)
Note: This setting is not valid for the 401GF or for 401
core-based processors.
The processor is not allowed to fold branches and cr
logicals during stepping and running.
When a branch instruction is encountered, program
execution will stop at the branch instruction rather than
automatically evaluating the branch instruction and
jumping to the location specified.
Configuration items
83