To Enable Or Disable Address Validation (Powerpc 400); Address Validation - Agilent Technologies E5900B User Manual

Chapter 7: Configuring the Emulation Probe
Configuration items
To enable or disable address validation
(PowerPC 400)
The address validation option can be used to check the validity of addresses
prior to accessing memory.
Address Validation Configuration
Command
cf addrv=yes
cf addrv=no
84 Agilent Technologies Emulation for the PowerPC 400/600/700
Meaning
If yes, the driver checks the validity of addresses before
it performs memory accesses. Valid memory addresses
are either memory mapped on the chip's internal bus or
defined by a bank register. A memory access to an invalid
address will return an error message.
Note: This setting is not valid for the 401GF or for 401
core-based processors.
If no, the driver does not check the validity of addresses.
A memory access to an invalid address, in this case, will
not return an error message but will cause a bus error on
the processor. (Default)